Product Description
The 24kV Indoor High Voltage Indicator kit includes an indicator DXNQ-20C, connecting cables VIO-DXN-L (length: 4M), and 3 pieces three-phase insulator sensors, which matches with the high voltage sensor to become a set of electrical indicating device. It uses on inspecting live state for high voltage circuit. 具有閉鎖接點輸出功能的顯示器可同時閉鎖高壓電氣設備 which can prevent electrical mis operation and accidentally enter the charging interval.
- With the shielding cable and the low-capacity sensor, you can have a safer way to inspect the power voltage.
- Indicator can have the withstand voltage test at the same time.
- The interface with LED and test function, it can be kept a long service life.
- Auxiliary contact control capacity is 3.5A~7A、250V AC or 30V DC
- Easy maintenance and installation, and the accessories can be replaced separately.
- (we also design customized maintenance project for user)
- Displaying the test result in English interface.
- Phase order is L1/L2/L3
- Voltage Capacitance: 15pF
- Application range:Suitable for 24kV power equipment。
- Operational Power Supply: 110~220V AC/DC。
Technical Parameter
DXN-Q-20C Technical Parameter | |
Ambient Temperature | -25°C~+55°C |
Withstand Voltage | 2kV/1min |
啟輝電壓 | 15%~40%Un |
Rated frequency | 50Hz或60Hz |
Ingress Protection Rating | IP54 |
輔助電源電壓 | 110V/220V AC /DC |
VD Dimension | 96×48×88(mm) |
VD hole size | 91×44(mm) |
DXN-Q-20C Technical Parameter
配套電纜
配件型號:VIO-DXN-L(四米長) 3PCS每套電纜包含 L1、L2、L3 三條電纜, 每條電纜上有L1、L2、L3 相序顏色及長度標識。電纜的長度為四米(如有特殊要求 可客製化歡迎聯繫)。
- 電纜顏色: 黑
- 電壓電容 15pF
- 備註:適用於24kV產品
VIO-DXN-L戶內高壓帶電顯示器電纜
配套支柱絕緣子式電壓傳感器
CGR210C20/16A採用環氧樹脂自動壓力凝膠工藝(簡稱APG工藝)成型的新型電壓感 測器。適用於戶內3.6~40.5kV,頻率50/60Hz的戶內高壓電氣設備中,與戶內高壓帶 電顯示器配套使用,反映高壓迴路帶電狀況。
CGR210C20/16A 絕緣子式傳感器
技術參數
DXN-Q-20C技術參數 | |
額定電壓(kV) | 24 |
雷電沖擊(kV) | 125 |
工頻耐壓(kV/1min) | 68 |
局部放電(pC) | ≦10 |
爬電距離(mm) | ≧480 |
電容量(pF) | 15±20% |
高度(mm) | 210 |